| Model |
LEC-300 |
Printing technology |
Piezo electric inkjet |
Media |
Width |
182 to 762 mm (7.2 to 30 in.) |
Thickness |
Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cutting |
Roll outer diameter |
Maximum 180 mm (7.1 in.) |
Roll weight |
Maximum 20 kg (44 lb.) |
Core diameter |
50.8 mm (2 in.) or 76.2 mm (3 in.) |
Printing/cutting width *1 |
Maximum 736 mm (29 in.) |
Ink cartridges |
Types |
Roland ECO-UV INK |
Capacity |
220 cc |
Color |
Six colors (cyan, magenta, yellow, black, white, and gloss) |
Ink-curing unit |
Dual UV LED lamps |
Printing resolution (dots per inch) |
Maximum 1440 dpi |
Cutting speed |
10 to 600 mm/s (10 to 300 mm/s in media-feed direction) |
Blade force |
30 to 300 gf |
Blade offset compensation |
0.000 to 1.500 mm (0 to 0.0591 in.) |
Software resolution (when cutting) |
0.025 mm/step (0.000984 in./step) |
Distance accuracy (when printing) *2 |
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater |
Distance accuracy (when cutting) |
Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater.
When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made):
Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater. |
Repeatability (when cutting) *3 |
±0.1 mm or less |
Alignment accuracy for printing and cutting *4 |
±0.5 mm or less |
Alignment accuracy for printing and cutting when reloading media *5 |
Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater |
Connectivity |
Ethernet (10BASE-T/100BASE-TX, automatic switching) |
Power-saving function |
Automatic sleep feature |
Power requirements |
AC 100 to 240 V ±10%, 50/60 Hz, maximum 3.4A |
Power consumption |
During operation |
Maximum 320 W |
Sleep mode |
Approx. 23 W |
Dimensions (with stand) *6 |
2,200 (W) × 820 (D) × 1,260 (H) mm |
Weight (with stand) |
175 kg (386 lb.) |
Environmental |
Power on |
Temperature: 20 to 32°C (68 to 90°F) , humidity: 35 to 80% (no condensation) |
Power off |
Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80% (no condensation) |
Accessories |
Stand, power cord, blade, blade holder, media clamps, replacement blade for separating knife, cleaning kit, software RIP (Roland VersaWorks ), user's manual, etc. |
| *1 |
The length of printing or cutting is subject to the limitations of the program. |
| *2 |
Using Roland specified media, print travel of 1m, temperature: 25°C (77°F), humidity: 50 %RH |
| *3 |
Using Roland specified media, loaded on the shaft, [PREFEED] menu item must be set to "ENABLE," with 25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media. Media 3,000 mm long. |
| *4 |
Provided that media length is under 3,000 mm. Temperature: 25°C (77°F). Excluding possible shift caused by expansion or contraction of the media and/or by reloading the media. |
| *5 |
Using Roland specified media, data size: 1,000 mm in the media-feed direction, 1,346 mm in the carriage-movement direction. No lamination. Automatic detection of crop marks at 4 points when media is reloaded. During cutting, [PREFEED] menu item must be set to "ENABLE." Temperature: 25°C (77°F). Excludes the effects of slanted movement and of expansion and contraction of the media. |
| *6 |
During operation of the media take-up system, an operating range of approximately 80 mm back from the front edge of the dancer roller is required. |
|
